Jintai_logo
Jintai_extruded_honeycomb_ceramic_foundry_filter Jintai_infrared_ceramic_tile Jintai_alumina_ceramic_foam_filter Jintai_high_efficiency_tower_packing
Home Contact JINTAI Organization Qualification Sitemaps
Product List

Tower Packing>>Plastic Random Packing>>Plastic Pall Ring                                                                              Sales: Biz@jintai-group.cn

Plastic Pall Ring

Product No: (JT-PPR)

JINTAI--PLASTIC PALL RING PACKINGJINTAI--PP Pall Ring PackingPlastic Pall Ring Random Tower Packing

      JINTAI Plastic Pall ring has an advance on the Raschig Ring, the Pall Ring has similar cylindrical dimensions but has two rows of punched out holes, with fingers or webs turned into the centre of the cylinder, which significantly increases the performance of the packing, in terms of throughput, efficiency and pressure drop.

       Capacity versus Pressure Drop of JINTAI Plastic Pall ring, Most suited in low pressure drop, high capacity applications, A range of sizes of Plastic Pall rings allows the tower to operate at an optimum efficiency and throughput, Consistent ratio of free and blocked passages, independent of orientation, Large surface area : volume ratio augments the rate of liquid film surface renewal to improve mass transfer. Hold-up and Two-phase Contact, Promotes highly efficient two-phase contact and distribution; A relatively high liquid hold-up promotes high absorption efficiencies, especially in cases where the reaction rates are slow; Uninterrupted and consistent passages for gas and liquid flow.

      Versatility of JINTAI Plastic Pall ring, Open, cross-linked design provides a highly efficient used of the ring’s surface area, Robust to variations in liquid and vapour distribution.

        Mechanical Strength of JINTAI Plastic Pall ring, Its internal cross-structure of diametrical spars make it mechanically robust and suitable for use in deep packed beds.

Applications:

       JINTAI Plastic Pall rings are widely used in Absorption, scrubbing, and stripping services, Versatile alternative to metal Pall rings, all kind of separation,  constant decompress tower plants, compounding ammonia plant, decarbonization plant, separation of ethylbenzene,  seperation of isooctane/ methylbenzene.

Performance:

Good Capacity and Low Pressure Drop  

  • Higher capacity and lower pressure drop than ceramic packing.
  • Multiple sizes provide ability to optimize capacity and efficiency based on application requirements. 

Higher Liquid Hold-up and Residence Time

  • Relatively high liquid hold-up allows good absorption efficiency with slow chemical reaction.

Versatile Standard Packing

  • Lower sensitivity to liquid and vapor distribution quality allows use with conventional liquid distributors.

High Mechanical Strength  

  • Ring and spoke construction provides high mechanical strength, which allows use in deep beds.

Material: PP, PE, PVC, CPVC, PVDF

Specification
D*H*δ
Specific surface area
m2/m3
Void
ε
m3/m3
Num
n
m-3
Bulk Density
kg/m
3
Dry packing factor
m-1
5/8" 16*16*1mm 188 0.91 180000 141 275
1" 25*25*1.2mm 175 0.90 53500 91 239
1.5" 38*38*1.4mm 115 0.89 15800 71 220
2" 50*50*1.5mm 93 0.90 6500 56 127
3" 76*76*2.6mm 73.2 0.92 1927 60 94

You might have Interest in the following JINTAI TOWER PACKING Product:

CERAMIC RANDOM PACKING        PLASTIC RANDOM PACKING         

METAL RANDOM PACKING             STRUCTURED PACKING

JINTAI Ceramic Structured Packing JINTAI Ceramic Structured Packing JINTAI Plastic Structured Packing JINTAI Metal Structured Packing JINTAI Metal Structured Packing JINTAI Structured Tower Packing 
JINTAI Ceramic Pall Ring JINTAI Pall Ring JINTAI Plastic Pall Ring JINTAI Metal Pall Ring JINTAI Metal Pall Ring JINTAI Pall Ring Packing 
JINTAI Ceramic Raschig Ring JINTAI Ceramic Raschig Ring JINTAI Metal Rachig Ring JINTAI Metal Raschig Ring JINTAI Metal Super Raschig Ring JINTAI Raschig Ring Packing 
JINTAI Ceramic Intalox Saddles JINTAI Ceramic Super Intalox Saddles JINTAI Metal Intalox Saddle Ring JINTAI Plastic Intalox Saddle Ring JINTAI Plastic Super Saddle Ring JINTAI Saddle Ring Packing 
JINTAI Ceramic Cascade Mini Ring Packing JINTAI Plastic Cascade Mini Ring Packing JINTAI Plastic Cascade Mini Ring JINTAI Metal Cascade Mini Ring JINTAI Metal Cascade Mini Ring JINTAI Cascade Mini Ring Packing 
JINTAI Metal Tellerette Rosette Ring JINTAI Plastic Tellerette Rosette Ring JINTAI Plastic Tellerette Rosette Ring JINTAI Plastic Tellerette Rosette Ring JINTAI Ceramic Rosette Ring JINTAI Tellerette Rosette Ring Packing 
Alumina Ball Inert Ceramic Ball Inert CERAMIC BALL Alumina Ball Alumina Ball JINTAI Catalyst Support Media 
    
-Ceramic Foam Filter-

Alumina Ceramic Foam Filter
SiC Ceramic Foam Filter
Zirconia Ceramic Foam Filter


---Tower Packing---

Ceramic Random Packing
Metal Random Packing
Plastic Random Packing
Structured Packing


-Ceramic Honeycombs-

Infrared Ceramic Tile
Ceramic Honeycomb Substrate
RTO Honeycomb Ceramic
Diesel Particulate Filter
Honeycomb Foundry Filter


-Others-

Molecular Sieves
Acid Resistant Ceramic
Inert Alumina Ceramic Balls


-Product Navigation-

Product Photo Gallery
Product Application

  CopyRight 2005 Jiangxi Jintai Special Material LLC. All Rights Reserved
 
 Tel: +86-799-6818111/6886565                         Fax: +86-799-6810066
               E-Mail: biz@jintai-group.cn                    Web: www.ceramic-honeycombs.com
Address: Room1008, Heng Long International Building, No.93 Yue Jin South Road, PingXiang, JiangXi 337000, China